Product
Information and Technical Data
#170
Elasticote is a high solid content, seamless elastomeric membrane. #170 Elasticote incorporates
the latest in roof coating technology to provide superior leak-free durability.
It is a solvent based thermoplastic formulation that provides up to five times
the tensile strength and at least twice the elongation/recovery of acrylic
elastomeric roof coatings. It provides a seamless rubber-like coating that
withstands building movement and thermal shock. #170 Elasticote seals the roof,
protecting it from the weather. This highly reflective coating will keep
buildings cooler saving energy and money while protecting the roof system.
Composition:
#170 Elasticote is a polymer based solvent reduced coating that cures to a tough,
waterproof membrane.
Applications:
#170 Elasticote can be applied over
metal, asphalt, wood, masonry, and modified bitumen membranes. Apply with brush,
heavy nap roller, or spray equipment. Two coats are recommended for maximum
reflectivity and durability.
Coverage:
Approximately 1 to 2 gallons per
100 s.f. per coat.
Color: #170 Elasticote’s
standard color is white. Special colors are available upon request.
Advantages:
-
Lightweight – Adds less than 0.2 pounds per s.f.
-
Versatile – Can be applied to most common roofing materials
regardless of pitch.
-
Reflectivity – Reflects the sun’s harmful UV rays. Keeps
buildings cooler, reduces energy costs.
-
Durability – Has exceptional resistance to deterioration due to
weathering.
Easily Repaired – Mechanical damage is repaired by simply
applying more #170 Elasticote to the damaged area.
-
VOC Compliant
-
Energy Star Compliant
-
System warranty available
Preparation: Surfaces
to be coated must be clean and dry. Remove all dirt, dust, debris, or any other
foreign matter by using a stiff brush, force air, or power washing the roof.
Remove rust from metal surfaces with a wire brush and securely attach any loose
fasteners before coating. If applying over built-up or modified bitumen roofs,
repair any blisters, splits, and broken o
r loose flashings with roof cement
before applying coating. Allow repairs to dry before coating with #170 Elasticote to
prevent bleed-through. Porous masonry surfaces should be primed first.
Packaging: 5
gallon pails and 55 gallon drums.
 |
| Typical Acrylic Coating
|
Elasticote
|
Technical
Data:
Specifications in Packages
|
%
Non-Volatile Liquid Elastomer
|
25%
|
|
% Pigments
|
33%
|
|
% Total
Solids
|
58%
|
|
% Solvents
|
42%
|
|
Container
Stability
|
1 year
|
|
Flash Point
in Pail
|
105°
F
|
Installed
Product Performance:
|
Dry
Time:
To
Touch
Throughout
|
2-3 Hours
3 Days
|
|
Film
Thickness of 1 gal./100 s.f.
|
7 mils
|
|
Color
Stability
|
Excellent
|
|
Elongation,
ASTM D-412:
At
77°F
At
32°F
|
200%
100%
|
|
Tensile
Strength, ASTM D-412
|
200
psi
|
|
Temperature
Range:
Application
Service
|
40°
to 120°
-40°
to 180°
|
|
Resistance
to:
Oil
Sunlight
Chemicals
Ozone
|
Good
Excellent
Excellent
Excellent
|
|
Permeability,
Water Vapor ASTM E-96
|
0.2 perms
|
|
Weathering
Effect
|
Slight
Chalking
|
|
Adhesion:
Metal
Concrete,
Stucco
Wood
Asphalt
Based Materials
|
Excellent
Excellent
Good
Excellent
|
|
Cold
Temperature Flexibility
|
Excellent
|
|
Abrasion
Resistance
|
Excellent
|
|
Resistance
to Foot Traffic
|
Excellent
|
CAUTIONS:
Contains petroleum
distillates. If swallowed, do not induce vomiting. Call physician immediately.
Combustible. Keep away from heat and open flame. Avoid prolonged contact with
skin and breathing in vapor. Close container after each use. Use with adequate
ventilation. Keep
out of reach of children.
Availability
and Costs:
Availability:
Products are immediately available from GlobalShield, Inc.
throughout the United States.
Cost:
Cost data is available from your local GlobalShield representative.
Call (678)355-5129for additional information.
Technical Services:
GlobalShield
Technical Services Department provides problem analysis and assistance in
developing recommendations for special applications.
Warranty systems require inspection by GlobalShield prior to
installation. Progress and final inspections are also required.
GlobalShield,
Inc.
320-P North Point Parkway
Acworth, GA 30102
800-374-7663
770.974.2499
Fax: 770.974.2723
Email:
solov@global-shield.com
Web site: www.global-shield.com
